On houses the work runs from repairs after storms, failed flashing and localised leaks, through full replacement, to separate flashing, skylight, gutter and roof-vent services. Surrey residential roofing
Surrey built much of its housing inside a single generation. The 2021 Census counted 185,670 occupied private dwellings in the city, and 86,640 of them, close to half, date from 1981 to 2005. Those are homes, not roofs: a townhouse row or an apartment building puts many dwellings under one roof. Even so, buildings finished together were roofed together, so many of their owners may meet the repair-or-replace question over a similar span.
As a roofing contractor working in Surrey, GoodVans Roofing handles houses, strata complexes and commercial or industrial buildings, from first inspection to full replacement.
The census gives 1981 to 1990 as the build period for 32,095 occupied dwellings, 1991 to 2000 for 36,435, and 2001 to 2005 for 18,110. A house finished in 1995 might still carry its first roof, might be on its second, or might have had new shingles laid over old ones. The build year caps how old the roof could be. It cannot tell you how old the roof is.
The difference matters because the coastal weather keeps working on whatever covering is up there: long rainy months, damp slopes under trees, moss wherever a surface rarely dries. An early-1990s original and a ten-year-old replacement can face that weather in very different condition.
So the opening question for a roof here is which roof it is. Paperwork and the covering's condition narrow it down, and an inspection can often settle the rest.
A reliable price needs someone to have measured and seen the roof, and proposals compare properly only when items are listed separately.
The City of Surrey's residential building permits page (opens in a new tab) answers this only indirectly. Its examples of work usually needing a permit include new houses, additions, basement finishing and interior renovations, while minor repairs to a home's exterior are listed as needing none. Roofs are not mentioned, and "minor" is not defined.
So the scope decides. Replacing a worn covering is a different matter from adding framing, changing a roof line, building a dormer or repairing structure exposed during tear-off. If in doubt, the City asks owners to call its Building Information Line first.
Responsibility for getting permits sits with the property owner, the City says, and its guidance on construction without permits warns of fines and of remediation or removal at the owner's cost. Multi-family and commercial buildings also have a separate building envelope remediation permit in Surrey; a strata council or owner should ask the City whether a planned roof project falls under it.
Whatever the permit answer, the BC Building Code continues to govern underlayment, flashing, attic ventilation and the protection laid at eaves and valleys.
On houses the work runs from repairs after storms, failed flashing and localised leaks, through full replacement, to separate flashing, skylight, gutter and roof-vent services. Surrey residential roofing
Where a warehouse, plant or other commercial building has a low-slope roof, that roof is designed to move water toward its drains or scuppers, so blocked outlets, ponding and opened seams can matter as much as wear on the surface. The work offered spans low-slope membranes including torch-on, coatings for membranes still in sound condition, and roof asset management plans that help owners understand condition and plan maintenance or replacement. commercial and industrial roofing across Surrey
The census counted 30,930 row-house homes in Surrey in 2021. That describes how homes are built, not who owns or decides about a roof, which is confirmed property by property. On a strata project the council or property manager stays involved from first look to handover. strata roofing for Surrey complexes
Metal is usually given the longest potential life of the four below, and moss finds little grip on its smooth face. Architectural asphalt is a common regional choice for houses and townhouse complexes. Read the spans as broad industry ranges that move with product, installation, exposure and upkeep; they are not warranties.
| Material | Typical service life (approx.) | Commonly used for | Maintenance | Notes for Surrey |
|---|---|---|---|---|
| Architectural asphalt | 20–30 years | Detached homes, townhouse complexes | Moderate | On a 1981–2005 home, confirm whether these are the first shingles before judging what is left. |
| Metal and metal shingles | 40–70 years | Open sites, outbuildings, newer construction | Low to moderate | Sheds rain fast and resists moss, though gutters under trees still fill. |
| Cedar shake | 20–30 years | Older character houses | High | In damp shade it needs regular care to reach its range. |
| Torch-on SBS | 20–30 years | Flat sections, carports, commercial low slope | Moderate | Relies on water reaching the outlets; ponding should be investigated, and what it means varies by system. |
Repair generally suits a problem confined to one spot on an otherwise working roof: one leak, one wind-damaged slope, one failed detail. Replacement generally makes sense once wear has spread, the deck has given way in several places, or repairs recur until their running total nears the cost of a new roof.
Sorting out which one applies falls to an assessment.
A third answer is easy to miss: a roof surface in good order over an attic short of ventilation may need the ventilation fixed rather than the roof.
Moss is one of the region's most persistent roof problems. It keeps water sitting on the covering, and as it thickens it may prise up shingle edges and stop the roof drying out. How much harm results turns on the material and on how long the growth stays.
Deal with it early, using a method the manufacturer accepts. Avoid high-pressure washing on asphalt, which can strip the protective granules.
On low-slope sections the matching concern is drainage: keep outlets open and investigate pooled water rather than living with it.
How often to inspect depends on the roof: the system, its age and condition, its exposure, recent storms and past trouble. Early autumn works well, leaving time to fix problems before the rain. A check after a major windstorm, or before a sale or purchase, is worthwhile at any time.
Request a written roof inspection, with a view on repair or replacement where the condition supports one.
Replacement then follows a set order:
Estimate
Material choice
Scheduling with weather in mind
Site protection
Removal
Repairs to the deck
Underlayment
The new covering and its ventilation
Final inspection
A sweep for stray nails
Handover of the applicable warranty paperwork
Clear gutters and downspouts where they can be reached safely, cut back branches, and have the valleys cleared and the sealant at chimneys, vents and skylights checked.
Look in the attic for frost on the sheathing or damp insulation, and arrange moss treatment on shaded slopes and a second gutter clean.
Walk the yard looking for shingle pieces and washed-off granules.
Keep to checks that can be made safely from the ground or from inside. Anything at roof level, moss treatment included, belongs with someone properly equipped. On a complex, someone should be named to arrange these checks, since roof areas are often out of residents' sight.
Guidance by material: how long each roofing material tends to last.
Two warranties may sit behind one job: one from the manufacturer for the materials, one from the contractor for the installation. Coverage, length and conditions can differ, so ask which covers what.
Before signing, ask whether the job will be registered with the manufacturer, whether coverage transfers on a sale, and what conditions apply. Ventilation and maintenance conditions are common.
Start with what was left behind: receipts, a warranty card, a manufacturer label in the attic, or a note from the seller. Without those, an inspection can often indicate the type of covering, whether it appears to sit over an earlier layer, and how worn it is.
Not necessarily. Homes built together were often roofed together, so the timing is a reason to have yours checked, not proof it needs replacing. Exposure, ventilation and past repairs also vary between houses.
An exact figure is not something an inspection can responsibly give. It can say whether further repairs still look worthwhile or whether it is time to plan a replacement. The ranges in the table are industry estimates, not forecasts for one roof.
It depends on scope. The outside of the roof can often be examined with nobody indoors, but checking attic airflow and the deck from inside needs access through the house. Say which you want when booking.
A short account of what has changed, on the roof or inside, is usually enough to judge whether a visit is the next step. Anything found, and any work it points to, is explained before a date is set.
GoodVans Roofing publishes its service area as Metro Vancouver plus selected communities in the Fraser Valley. Whether an address falls inside it is confirmed on enquiry.