facebook instagram Whatsapp
Certified Master Roofers in Metro Vancouver

No worries. Let's try it this way

Please fill your details, and we will provide you with an estimate in a very timely manner.

Vancouver, BC · Commercial Roofing

Roof Coatings & Waterproofing in Vancouver, BC

A roofer rolling a light-grey coating across a low-slope commercial roof, with the city and mountains behind

Coating usually gets considered at a particular moment: the roof is giving trouble, replacement has been priced, and the figure is unwelcome. A reasonable place to arrive from, but not where the first question gets answered. Whether a coating is technically suitable follows from the roof — its condition, and whether the surface suits what would go over it. Cost belongs in the decision once that is settled, among the options still standing. Roof coatings are something GoodVans Roofing applies to commercial and industrial buildings around Metro Vancouver, on the roofs where that is the right piece of work.

What roof coatings are being asked to do

A coating goes on top of whatever roof is already up there, forming a protective layer over the surface prepared for it. Notice where that sentence stops. It treats the surface; the assembly underneath is not altered by something new sitting on top.

Which is why the two words in this page's title are not interchangeable. Waterproofing names an intent; a coating is one thing that may serve it, on a roof in a condition to be served that way. Over a system still performing, it adds protection to the surface. Over deterioration nobody has addressed, it hides the problem rather than resolving it — and hidden is worse than visible.

An argument for looking before deciding, then — not against coatings.

A freshly coated low-slope roof with vents and a rooftop unit, the downtown skyline beyond

The first question is what it is going over

Every coating decision sits downstream of an assessment. The inspection GoodVans Roofing opens with is thorough by design — cracks and leaks analysed — and what it finds sets the approach.

What it looks for is practical. Which system is up there and how it is holding up. Whether the surface will take a coating and keep hold of it. Whether damage sits in one place or across several. Whether water is finding its way in, and whether anything beneath has taken moisture on. Where the water goes, since a coating does not redirect it. And how seams, terminations and penetrations are behaving.

The roof's own history is part of that surface. Earlier coatings, old repairs, patched areas — a new system bonds to all of it, and none is necessarily recorded or visible from above.

None of this comes out of a description or a photograph, which is why a coating proposal without an inspection deserves care.

A roofer kneeling to examine cracks in an existing roof surface, tablet in hand

Preparation is not a formality

GoodVans Roofing deals with what needs dealing with first, and the reason given is plain: so the system does not fail early.

Preparation is no courtesy step. A coating is a bond; where the surface is contaminated, damaged or wet, that bond is compromised from day one.

Moisture inside the assembly carries real weight: water already there does not leave because something has gone over it — it stays, under a layer never meant to hold it in. It is not the only thing that decides the job, though. Membrane condition, substrate suitability, coatings already present, product compatibility and the preparation itself may each settle it. And since the surface must be fit at the moment of application, when the work happens is a scope question here, not one for the calendar.

Seams and joints take particular attention, where a continuous surface must be made over something that never was.

Not every protective roof coating is designed to function as a waterproofing system. Some coatings can form part of a specified waterproofing solution, but their role depends on the product, the existing roof assembly and the detailing involved.

Three directions an assessment can point

Go ahead. The system underneath is performing, the surface will hold a coating, and the job is preparation then application.

Fix something first. Damage in one area, a failed detail, or water not getting away properly — any may have to be put right before coating is a sensible proposition. Settle them, then ask again with a better answer.

Look elsewhere. Deterioration spread across the roof, a surface the system cannot bond to, moisture inside the assembly, or drainage trouble no surface treatment reaches — each points away from coating toward a different scope: the commercial roofing conversation.

Which of the three you get is a result, not a starting position. Naming one before going up on the roof is pricing a guess.

A gloved hand brushing coating around the base of a roof vent

What the work involves

Inspect the roof closely
Prepare the surface
Apply the protective system
Check the finished work

Four stages, the first two carrying the weight: inspect the roof closely, cracks and leaks analysed; prepare the surface, dealing with whatever must be dealt with; apply the protective system; check the finished work.

An enquiry, ahead of all that, gets a property visit, a recommended option and an estimate.

A roofer cleaning and repairing an existing low-slope roof surface before it is coated

What should be settled in the scope

Five things belong in writing before anything is agreed. What the assessment found. Which repairs and preparation sit inside the price and which do not. The surface area in scope. How seams, terminations and penetrations get treated. And what happens if preparation uncovers something the assessment could not see — a bigger question here than on most jobs, since the work opens the surface it treats.

A sixth looks forward: a coating becomes part of the roof, so what goes on now is what the next job must bond to or remove.

  • What the assessment found
  • Which repairs and preparation sit inside the price
  • The surface area in scope
  • How seams, terminations and penetrations get treated
  • What happens if preparation uncovers something

Common questions

The roof was coated a few years ago. Does that change our options?

It changes what the surface is. Whatever went on then is what anything new must bond to, and compatibility is a real question. It may be straightforward; it may mean the old coating comes off first. The assessment settles it.

There is moisture in the roof. Can a coating go over it?

Moisture in the assembly is a clear reason to look harder. A coating dries nothing out, and water under a new surface is worse placed than under the old, since nobody sees it. A finding to act on, not to cover.

The quote says waterproofing. Is that the same as a coating?

The words get used loosely, so read what is specified. A coating is a surface treatment over a prepared roof. Whether it amounts to waterproofing depends on the product, what is underneath, the detailing and the drainage. If a quote uses the broader word, ask what is applied and over what.

Does it matter when the work happens?

It can. A coating bonds to a surface in a fit state at the time, so conditions during application are part of the job. Worth raising while it is being scheduled.

Where to start

Choosing between a coating, a repair and a replacement comes down to what the roof will support, which only an assessment answers. Get in touch to book one, or the roof coatings and waterproofing service page covers what the work includes. If the real question is the system rather than its surface, the torch-on roofing and low-slope roof systems pages cover that.

Let's talk

Contact Info

  • Address GoodVans Roofing 207 W Hastings St, Unit 1210, Vancouver, BC V6B 1H7, Canada
  • Contact Number 17783778209
  • Email ID info@gvroofs.ca
facebook instagram Whatsapp