facebook instagram Whatsapp
Certified Master Roofers in Metro Vancouver

No worries. Let's try it this way

Please fill your details, and we will provide you with an estimate in a very timely manner.

Vancouver, BC · Residential Roofing

Skylight Install & Replacement in Vancouver, BC

A roofer in a harness fitting a new skylight unit into a shingle roof, with the mountains behind

A skylight is three things working together: a manufactured unit, the roof opening it sits in, and the roofing that surrounds that opening. Each ages on its own terms and can fail independently of the others. A unit can be in good order inside roofing that is not, and the roofing can be sound around a unit that has stopped doing its job. So the first question on any skylight — new, failing, or merely suspected — is which of the three is actually in play. GoodVans Roofing installs and replaces skylights on houses across Metro Vancouver. What follows is about telling them apart before any work is agreed.

Which part actually needs attention

Three separate things meet at every skylight, and keeping them apart is what makes the next decision sensible.

The unit. Glazing, seals, frame. Damage you can see, glazing that has changed, a frame that has shifted, or an opening unit that no longer works as it should — all point here. Pointing at the unit is not condemning it; that waits on what someone finds.

The interface. How the opening is sealed and tied into the roofing around it is a question of its own. A sound unit can sit in an interface that has given up. A tired unit can sit in one still doing its job perfectly.

The roofing beside it. The covering and details near an opening age on their own schedule. A skylight may also sit where the roof is doing something else — near a change of pitch, a dormer cheek, or the edge of a low-slope section. Where that is the case, the geometry becomes part of what the interface has to handle. Where the surrounding area has gone, work confined to the skylight leaves the real problem in place.

Four outcomes follow: keep it and watch, deal with the interface, replace the unit, or find out more first. Which one is a question about the roof in front of you.

A roofer sealing the flashing around a newly installed skylight on an asphalt shingle roof

Adding a skylight where there isn't one

Putting a skylight into a roof that currently works means cutting it open, which is why the roof gets discussed before the unit does.

GoodVans Roofing assesses the slope and the structure, considers where daylight would actually change how a room feels, and then puts options forward against the brief and the budget. Nothing is installed until the structure has been looked at. That order is deliberate: suitability is decided by the roof, not by the room below it.

Four things repay settling early — the room and the roof plane, what cutting the opening involves, how the unit ties into the roofing around it, and where the job's edge falls. The last is where expectations part company. Finishing the ceiling around a new opening is not roofing work, and whether it sits inside the scope is better written down than inferred.

A finished skylight set into an asphalt shingle roof, with trees and mountains reflected in the glass
The room and the roof plane
What cutting the opening involves
How the unit ties into the roofing
Where the job's edge falls

Skylight replacement on an existing roof

Replacement becomes the question where a unit is damaged, has stopped working as it should, or is no longer worth keeping. The old unit comes out and a new one goes in — using the existing opening where the replacement suits it, or an opening adjusted to take it where it does not.

Two things to check first. That the unit really is the problem, and not the interface or the roofing beside it — which is what the section above is for. And how that roofing is faring, since a new unit changes nothing about deterioration next to it.

What decides it is condition, performance, fit with the work proposed, and what the scope covers. Age alone is not the test.

A roofer removing an old domed skylight from its opening on a shingle roof

When moisture appears near a skylight

Water showing up around a skylight is not proof that the skylight is letting it in.

Four candidates, at least. The unit and its seals. The junction where it meets the roofing. The covering around the opening. And condensation, which earns serious consideration through a Vancouver winter — warm, humid indoor air meeting a cold surface puts water on that surface, and glazing set into a roof can be the coldest thing in a room across a long run of cool, wet weather. On the ceiling it looks much like a leak.

Each leads somewhere different, so working out which one comes before anyone picks the work. Where the answer turns out to have nothing to do with the skylight, roof repair and maintenance is where tracing it belongs.

A roofer checking the junction between a skylight and the surrounding shingles after rain

If the roof is being replaced anyway

With the roofing beside it already coming off, the unit and its interface can be handled inside that scope instead of becoming a second visit.

None of which argues for replacing it. Keeping or replacing turns on what condition the unit is in, whether it suits the covering going on, and what the project is paying for. A unit worth keeping can stay, with its interface rebuilt into the new covering. A unit already in question is worth deciding on while the access exists and the roofing around it is open.

Either way, the call belongs in roof replacement planning. Postponed to the day itself, it gets made under time pressure by whoever is standing there.

What should be clear in the scope

Five answers make a skylight quote readable. Is this a new opening or one that already exists? Is the work aimed at the unit or at the interface? What state is the roofing beside it in? Is other roof work running at the same time? And at what point does interior finishing stop being somebody else's job?

One more is worth adding: what happens if the area opens up and something unexpected sits behind it. Agreeing how that gets priced beats finding out mid-job.

  • A new opening or one that already exists
  • The unit or the interface
  • What state the roofing beside it is in
  • Other roof work running at the same time
  • At what point interior finishing is somebody else's job

Common questions

The skylight seems fine but the roofing around it is old. Do we have to do both?

Not necessarily — it depends on what that roofing is doing. Where it is performing, work can stay with the unit or its interface. Where it has deteriorated, a new unit sits in ground that needs attention anyway, and doing the skylight alone tends to mean opening the same area twice.

Can the new unit go into the same opening, or does the opening have to change?

It depends on the opening and on the unit going into it. Sizes, frame depths and fixing arrangements differ, so an existing opening may take a replacement directly or may need adjusting first. Settle that before anything is ordered, not after the old unit is out.

Our roof is due for replacement next year. Should we deal with the skylight now or wait?

If nothing is getting in, waiting usually makes sense: the roofing around it is coming off anyway, so the interface gets done once rather than twice. If water is entering now, that is its own matter. Either way the skylight belongs in the replacement planning, not raised on the day.

Who deals with the ceiling finish around the opening?

Worth agreeing before work starts, because it is a different trade. Roofing covers the roof side — the unit, the interface, the covering around it. Finishing the ceiling around a new or enlarged opening is separate, and whether it falls inside the scope should be stated rather than discovered.

Where to start

Where something is going on at a skylight and the unit, the interface and the roof around it are all still candidates, the first job is ruling some of them out. Get in touch and we can take a look, or see what the skylight installation and replacement service covers.

Let's talk

Contact Info

  • Address GoodVans Roofing 207 W Hastings St, Unit 1210, Vancouver, BC V6B 1H7, Canada
  • Contact Number 17783778209
  • Email ID info@gvroofs.ca
facebook instagram Whatsapp